The Homemade .22 Silencer: Threadmount

            To legally manufacture a silencer/sound suppressor in the United States, it is imperative that one submits an ATF Form 1 with fee, waits until it is approved, and receives the approved form with attached tax stamp, before any construction is started

The first cuts on this project will be taken on the thread mount, the “entrance” end cap on the silencer.  I’ll be cutting 17-4ph stainless steel, making an internal thread of 1/2″-28 with a tap, and using the single-point threading method on a machine lathe to cut the external thread of .900″-28tpi.  Once all that is done, I will apply a helical knurl and a slight roundover to the cap!

Let’s just start at the beginning!  So, I decided to just chuck up my sizable piece of stainless into my lathe and supported the end with a steady rest.  This is a little helper to keep longer pieces of stock rigid in the lathe when you’re working on one end of them.  It made more sense to me to use this method than to cut off a piece and try to figure out how to hold it in the lathe.  After facing off the end to be perfectly flat, I turned down the outside to .900″, the outer diameter of the threads we’ll cut to screw into the tube.  This cut was made to 1/2″ back from the end, and took several passes.  I utilized a carbide bit, which is an extremely hard material and great for this sort of thing.

22canthreadmount2 22canthreadmount3

Once that diameter was turned, a groove was required at the very end of the turned down area.  This groove will give our threads a place to end, avoiding the phenomenon sometimes noted with factory threaded items where the threads sort of just spread out into the shoulder, preventing a tight and smooth fit.   To make this groove, I’m using a thin parting blade.  This tool is thin with a square tip and is plunged straight into the workpiece for grooving operations like this, or as you’ll see soon, cutting off an entire section of the metal.  To help prevent binding, one trick I’ve used in my lathe is to hold the parting blade upside down and turn the workpiece in reverse.  Due to the type of cut made in the parting operation, there is a tendency to grab the work and cause the tool post to bind.  With this method, the tool and tool post can be pushed out of the way in the event of the workpiece grabbing the tool!

22canthreadmount4 22canthreadmount5

With the groove successfully cut to a depth of .860″, the next task was to drill and tap the inside of the mount.  With progressively larger drill bits, passes are made on the lathe until the tapping size for a 1/2″-28 hole, which I use a 29/64″ drill.  This is the part that screws onto the firearm so making sure it is a tight and straight thread is crucial.

22canthreadmount6 22canthreadmount7

Sharp drill bits were key in this; the stainless is machinable bit still very hard. Truth be told, the bits I had sharpened with my drill doctor just wouldn’t cut very well, so after touching the cutting edges up properly on a grinding wheel, they cut the material very easily. This was a small but valuable lesson to me in the importance of learning how to grind a drill bit versus buying a machine to do it for you.

22canthreadmount8

With the holes drilled, I used my adorably small boring bar to turn a taper on the inside portion of the bore.  This will of course be what faces towards the inside of the silencer tube, so this taper will assist the expansion of gasses, as well as reduce the overall weight of this individual piece.

22canthreadmount9

Tapping the mount for 1/2″-28 was probably the easiest thread cutting operation of the entire can.  I am lucky to have found a reasonably priced tap in this thread size,  so all that is required is putting the tap into the lathe, and turning the headstock by hand.  As expected, the tapped threads came out perfect and only took a few minutes of grunting as I turned the workpiece around the tap manually, with plenty of cutting oil of course.

Moving to the external threads that will screw into the tube, these won’t be quite as simple.  Cutting threads on the lathe, referred to often as the “single point method”, is one of the most important operations on a metal lathe.  The cutting tool is driven across the work at at the correct ratio to the work’s turning speed in order to make the specific helix required for the thread pitch.  28 threads per inch is a comparatively fine thread pitch, so the tool doesn’t move across quite as quickly, and the total depth of cut won’t be as deep as some other thread pitches.  There are a number of considerations to take in making the threading cut, multiple things that need to be given attention simultaneously, and it can be a nerve racking process, but I got through it relatively unscathed.

22canthreadmount10 22canthreadmount11

This next paragraph is a bit of an esoteric machining soliloquy. My shop note on accomplishing these threads was that it would have been more optimal do it by the numbers.  While there are a couple of different techniques that can be utilized in the single point process on the lathe, the most accepted one is to disengage the cutting tool from the lead screw (which is what is driving it across the workpiece) after each pass, back the cross slide off of zero away from the workpiece, reset the tool (like a typewriter) put the cross slide back on zero, advance the tool on the compound rest ever so slightly (to deepen the thread by .001″-.002″), then re-engage the lead screw when the rotation dial is in the right place.  This method is what every teacher and book recommends, and is what I should have done.  The method I used was one recommended to folks with smaller lathes or unsure of the tool rigidity, which I’ll admit I was unsure of to a degree.  Instead of disengaging the lead screw and backing the tool off, the lathe is simply reversed after being stopped at the end of each cut. I should note that this did work and the threads are perfectly smooth, true, and tight, but in this method, it left scratches on some of the threads and in my opinion made them uglier than necessary, despite still being functional.  That’s enough of my abstruse rant.

22canthreadmount12

Out of the metal turning frying pan and into the metal turning fryer; another operation that many machinists don’t exactly look forward to is parting.  As I was describing the parting tool earlier, we’re basically just going to cut the thread mount off of the long bar stock now.  I do that just by turning the work slowly, and driving the parting tool straight into the part.   It takes a while, especially with hard material such as this, but it works!

22canthreadmount13

And it leaves a cut surface needing only a small amount of touch up; I put the threaded portion of my newly minted part into some aluminum tubing to protect the threads from the chuck jaws, and turned the part around to face off what I’d just cut.

22canthreadmount14

And since I happen to have such a cute boring bar, I put an equally cute chamfer on the side of the threads that will be twisting onto a barrel.

22canthreadmount15

At this point the part is basically functional.  I took a file and ran it over the rear corner a number of times to give it a nice, round edge

22canthreadmount16

Then I put a gripping surface on the part, since this is where the whole silencer will be gripped when screwing it onto a gun.  I did this with a method I’ve been experimenting with that I refer to as a Helical Knurl.  I made a YouTube video about the process a few months ago.  Basically, the part is placed on the bolt that mounts the tool post (I used a custom bushing to make sure it fit snugly but could still rotate) and a large tap is mounted in the chuck and supported with a center in the tail stock on its other end.  The tap is turned by the lathe, as the part is slowly moved in on the tool post.  As the tap starts to cut, it will rotate the part.  After feeding the part in, it has a relatively deep series of vertical and slightly angled cuts that not only look unique, but also provide an easy to grip, concave surface.  I’ve done the more traditional forms of knurling, and I tend to prefer this one when I can get away with it.

22canthreadmount17

After a quick pass with a file and some emery cloth in the lathe to clean everything up, that’s the thread mount!

22canthreadmount18

The next part to be made will be the forward end cap, which will be made out of 7075 aluminum.  If you’d like to see some of these machining operations in action, you can check out the video I made:

Jeff

Jeff has been a firearms enthusiast for over 20 years. He is an NRA Certified Pistol Instructor, and a Kansas Concealed Carry Instructor. He also enjoys hunting, reloading, attending practical training courses, and does the majority of his own gunsmithing. Jeff maintains a small garage workshop which he shares in his YouTube channel, Practical Renaissance.

0 thoughts on “The Homemade .22 Silencer: Threadmount

  1. Chernobyl Episode 5 HBO. “Chernobyl”. HBO
    http://bitly.com/hboChernobylhttps://i.imgur.com/IDveTye.jpg

    Chernobyl!!!Episode.5*HBO.=“Chernobyl”.!!!HBO.
    Chernobyl Episode 5 Episode 6 HBO. “Chernobyl”. HBO
    chernobyl hbo 5 episode 1 2 3 4 5 watch online

    http://bitly.com/hboChernobylhttp://bitly.com/hboChernobyl
    http://bitly.com/hboChernobylhttp://bitly.com/hboChernobyl
    http://bitly.com/hboChernobylhttp://bitly.com/hboChernobyl

    Chernobyl.Episode=5~~HBO.~“Chernobyl”.!!!HBO.
    Chernobyl Episode 5 Episode 6 HBO. “Chernobyl”. HBO

    The episode marks a transition where many parts of the government conspiracy become known with the alien blood, fetuses, and of course the Purity Control. Maybe one could argue that this is the start of the confusing stuff, but self-contained, the episode added a lot to the show, and gave us plenty of great stories later on. Sideshow freaks, underdeveloped fetus, and a general humorous tone to the episode. There was plenty of horror with the Fiji Mermaid, and yet the whole situation was funny. The weird combination made the episode lots of fun. The concept for this episode isn’t original as it has been done multiple times in various mediums; however, that does not mean the various incarnations of the concept are bad. The concept of timeloops itself allow for great creative freedom which usually ends up with a good episode. The X-Files did it very well with several ongoing gags such as the waterbed leaking. The idea behind the episode was so good that Fringe copied the concept, having someone be able to control the mind of others. What was unique about Modell was that he was able to affect human physiology. Chernobyl Episode 6 watch online. It is because of the ongoing effects that some people want nothing to do with the new dramatization. “We know about this film, but nobody wants to talk about it,” she says. “People who were there don’t want to relive it. Every day I work with the survivors, and often see them off on the last journey. A public opinion survey done by the state-funded VTsIOM agency in 2016 found that attitudes toward the nuclear power industry have changed dramatically since the years following the Chernobyl accident. In 1990, polls showed that 56% of Russians were opposed to further development of nuclear power, while just 14% supported it. A quarter century later, 58% approved of atomic energy, while 28% had a negative opinion. “There was a generation of Soviet people who witnessed Chernobyl, survived its consequences, and felt its lessons,” says Mikhail Chernysh, deputy director of scientific studies at the official Institute of Sociology in Moscow. He adds, “A lot of kids today probably know about it only because there is a popular video game called Chernobyl, where you go to a virtual Chernobyl and battle virtual monsters. Who knows what the next generation will know or think about it? Mr. Slivyak, the Russian anti-nuclear activist, concurs. “People think that Chernobyl happened in a different country, long ago,” he says. Mr. Slivyak’s family comes from southern Belarus, which is still under Chernobyl’s shadow. He says he well remembers the public mood of anxiety and fear during those tense days when there was no official information about the accident, even as mass evacuations were underway in the communities near the stricken reactor. “The first announcement was made on TV several days later, and it gave no real details. I recall it just spoke about a minor accident, nothing to worry about,” he says. The activist is among those who, contrary to others, have complimented “Chernobyl” for what they see as the use of sharp, horrifying detail to depict the accident. The miniseries is “close to real events as far as that is possible,” Mr. Slivyak says. This also marks the last time David Duchovny was a regular on the show which forces me to put it on the list. When Samantha is involved, Mulder immediately changes. He can be easy going all the time, but once Samantha’s abduction comes into play, he is reckless and loses perspective. That’s exactly what happens in “Paper Hearts.” Mulder is manipulated into believing that a serial killer had abducted her instead of aliens. In the end, it wasn’t true and no new information was discovered, but it’s all about the process of getting to that conclusion, and the episode hit it out of the park. Mulder goes off to the Bermuda Triangle looking for a ship, and instead travels back to 1939 where Nazis have taken over. The catch is that some of the people he meets look exactly like people he knows back home. Maybe it was a hallucination and never really happened, but that’s not the point; the episode was a blast. “Trust No One.” This simple phrase became the mantra of our heroes with the death of Deep Throat. Chernobyl 5 Episode.
    The lesson is that lying, arrogance and suppression of criticism is dangerous. The flaws that led to Chernobyl are the same flaws shown by climate change deniers today. How Much of the Series Chernobyl is Real? There was an unprecedented steam explosion that completely wrecked a reactor. Firefighters and plant workers—sometimes through ignorance and sometimes because of altruistic self-sacrifice—exposed themselves to huge doses of radiation to try to limit the damage. As for the miniseries, HBO calls it a “dramatization.” It’s a good description. The steam explosion was in fact dramatic: powerful enough to lift the 1,000-metric-ton lid off the reactor. It also was tragic. Thirty-one plant personnel, firefighters and other emergency responders died within three months from the explosion, radiation poisoning and other causes. Among the millions of people in the region, there may well be additional cases of cancer, although the number will be hard to pin down. But other parts clearly are dramatized. For example, one of the characters in the miniseries is there to unravel the mystery of what happened. But that had to be dramatized, because in the real event there wasn’t much mystery. Chernobyl Episode 5 watch online.

    Chernobyl**Episode///5~HBO.@“Chernobyl”.+HBO.
    Chernobyl Episode 5 Episode 6 HBO. “Chernobyl”. HBO

    Chernobyl=Episode..5//HBO….“Chernobyl”./HBO.
    Chernobyl Episode 5 Episode 6 HBO. “Chernobyl”. HBO

    Chernobyl**Episode+5!!!HBO.**“Chernobyl”…HBO.
    Chernobyl Episode 5 Episode 6 HBO. “Chernobyl”. HBO

    Chernobyl@@Episode///5/HBO.=“Chernobyl”.+HBO.
    Chernobyl Episode 5 Episode 6 HBO. “Chernobyl”. HBO

    Chernobyl@Episode!!!5..HBO..“Chernobyl”…HBO.
    Chernobyl Episode 5 Episode 6 HBO. “Chernobyl”. HBO

    Chernobyl.Episode*5@HBO.@@“Chernobyl”.~~HBO.
    Chernobyl Episode 5 Episode 6 HBO. “Chernobyl”. HBO

    http://bravo2zero.org.au/forums/showthread.php?275095-Chernobyl-Episode-5-HBO-Chernobyl-HBO&p=318337#post318337
    http://taleswravergg.imotor.com/viewthread.php?tid=4859&extra=
    http://139.224.238.147/bbs/viewthread.php?tid=627428&extra=
    http://minecraft.kginfoservs.com/forum/showthread.php?tid=14062
    http://www.awmn.net/album.php?albumid=165423
    http://punbb.board-ad.com/viewtopic.php?pid=264930#p264930
    http://igrai-razumno.com/forum/viewtopic.php?f=4&t=3856
    http://www.generalsofarmageddon.com/forums/viewtopic.php?f=4&t=31684
    http://tsterror.pl/viewtopic.php?f=2&t=13458
    http://forum.netweb.cba.pl/viewtopic.php?f=8&t=2063
    http://www.canepastoretedesco.info/phpbb/viewtopic.php?f=12&t=277976
    http://xatax.co.uk/viewtopic.php?f=4&t=560499
    http://aop.in.ua/communication/forum/index.php?PAGE_NAME=message&FID=3&TID=61594&MID=77712&result=new
    http://www.forum.loglasi.com/viewtopic.php?f=4&t=424063
    http://www.egologic.eu/nfsw/showthread.php?tid=177656
    http://vincityleseine.com/vin/viewtopic.php?pid=71346#p71346
    http://forum.parrotosocial.club/viewtopic.php?f=3&t=31791
    http://www.novaufo.net/forum/showthread.php?tid=39773
    http://egz-fazt.ru/communication/forum/index.php?PAGE_NAME=message&FID=2&TID=1&MID=19670&result=reply#message19670
    http://forum.substage.de/minibb/index.php?action=vthread&forum=3&topic=29&page=14#msg407713
    http://winatlosingweight.com/forum/viewtopic.php?pid=388074#p388074
    http://xn--onq308b3xlp8y.guanyo.com/viewthread.php?tid=45079&extra=
    http://forum.substage.de/minibb/index.php?action=vthread&forum=3&topic=2&page=22211#msg407752
    http://www.ngoinhachung.net/diendan/forum.php?mod=viewthread&tid=1843310&pid=2825102&page=16014&extra=#pid2825102
    http://www.zugalu.com/forum/viewtopic.php?f=11&t=280673

Leave a Reply

Your email address will not be published. Required fields are marked *